- Hersteller:TELEVES
- Barcode:8424450221907
- Verpackungseinheit:1
- Nettogewicht:7.1 kg
- Bruttogewicht:8.5 kg
- Maße / Verpackungseinheit:36x28x18
- Hochgeladen am:29-11-2022
- Das Produkt wurde entfernt:25-01-2024
The TELEVES 570104 K20 HEADEND DVB-S2 to QAM 20TP is a combination of references 570101 & 570102, ready to work standalone headend unit that generates QAM (DVB-C) multiplex from the services available in 20 TV SAT transponders DVB-S/S2 (Available in the future: S2X also). It is an autonomous and complete solution for transparent transmodulation of any transponder from a selection of the 4 satellite polarities. The headend allows its configuration through a Web interface via Ethernet or WiFi (extra accessory ref. 216802 required).
Highlights:
- The K20 DVBS2-QAM compact headend processes up to 20 (ref. 570104: 570101 & 570102) satellite input transponders into the same number of DVB-C cable channels, fully agile, in the range 46 to 862MHz (CCIR channels C02 to C69).
- A test output with an attenuated version of the output is also provided. The processing of each received transponder includes service fi¬ltering.
- Professional easy-to-install solution (Plug & Play): less cables and shorter installation time.
- Pre-settings AUTO-configuration: the user selects which preloaded configuration wants and the module configurates itself automatically.
- User Web Interface: Provides access to the headend configuration through Ethernet connection or a self-created WiFi network. The interface is perfectly adapted to any device: PC, smartphone or tablet.
- Good thermal management thanks to its built-in heat sink and fans.
- Each unit has two Ethernet RJ45 connectors, one for network connection and the other one for loop mode link between units. Thanks to the interface it is possible to configure input parameters of the network connection: IP address, subnet mask, and default port link, as well as the DHCP client mode.
Technical features:
SAT input up to 20 (ref. 570104: 570101 & 570102) satellite input transponders :
- Input frequency MHz 950...2150
- Symbol rate Mbaud 2 - 42.5 (DVB-S) , 10 - 30 (DVB-S2). (S2X available in the future)
- Input level dBµV 49 - 84
- Input and output connectors "F"-Female
- Input impedance Ohm 75
- LNB powering Vdc/KHz 13V/17V/ OFF - 22KHz (ON/OFF)
- Satellite selection (DiSEqC) A, B, C, D
- Modulation: DVB-S2 QPSK, 8PSK -(EN302307), DVB-S QPSK (EN300421). [Available in the future: DVB-S2X QPSK/8PSK, 8/16/32 APSK (EN302307-2)]
QAM modulator:
- Modulation format 16, 32, 64, 128, 256 QAM
- Symbol rate Mbaud 1 - 7.2
- Roll-Off factor % 15
- Block code Reed Solomon (188, 204)
- Scrambling DVB ET300429
- Interleaving DVB ET300429
- Bandwidth MHz 8.28 max
- Output spectrum (select.) Normal / Inverted
RF Output DVB-C up to 20 MUX (ref. 570104: 570101 & 570102) :
- Output frequency (select.) MHz 46...862 DVB-C
- Frequency steps KHz 250
- Maximum output level (select.) dBµV 95±5
- Attenuation dB 0 - 15 (total) , 0 - 10 (per channel)
- Through losses dB < 1
- Input/output connectors "F"-Female
- Output impedance Ohm 75
General:
- Power supply V~ 230 , Hz 50/60
- Average power consumption with input signal and powering LNB (250 mA + 250 mA): 570101 / max: 40W max: 450mA, 570102 / max: 55W max: 575mA, 570103 / max: 60W max: 625mA
- Protection index IP20
- Dimensions: 273x203x57 mm
